Freezer Storage Question
-
I'm not opposed to spending the money on a manual frost freezer as they are relatively inexpensive. It's roughly about 8 years worth of peptides. I've only opened my peptide hydrapeak to add more peptides, and expect to leave it closed unless adding or removing as necessary.
Thoughts?
f
you need put desiccant in your container
@MikeMiranda said:
you need put desiccant in your containerI have some of them in there. Look at the second graph. It's the blue line and hovers around 23% humidity as opposed the orange line that all over the place.
It's a bunch of the .5 gram packs like you would put in a salt shaker. I purchased some of the 3D printed vial size desicant holders but haven't added them yet. I will, the next time I open it.
-
First, where did you get those sensors from? And for me, I have one hydropeak in my chest freezer and one in the fridge (I access this one the most). With proper storage in the fridge, they should be good for at least a year. The only issue I have is with my hydropeak. The majority of the time it is hard as hell to get the top to unscrew. I mean, it's just awful. I need to find some food-grade silicone grease to lubricate that seal.
First, where did you get those sensors from? And for me, I have one hydropeak in my chest freezer and one in the fridge (I access this one the most). With proper storage in the fridge, they should be good for at least a year. The only issue I have is with my hydropeak. The majority of the time it is hard as hell to get the top to unscrew. I mean, it's just awful. I need to find some food-grade silicone grease to lubricate that seal.
These are the Govee bluetooth, not the wifi ones that @mikemiranda mentioned. But I would recommend the wifi that he mentioned over these. Just keep in mind that the wifi appear to be a little bit bigger than the bluetooth only. I was hoping they would be small enough to fit without sacrificing much room. I was wrong. They are too thick for the hydrapeak inserts. @mikemiranda storage unit is much bigger. Besides the size, the main reason I didn't go with the wifi one is that I alread have a YoLink system for getting data while away from home. The YoLink system has both thermometers and water leakage sensors. It's just the system I chose before learning about the Govee.
I'm doing similar to you. I have one hydrapeak in the fridge for stuff that I won't touch in a while and 4 in the refrigerator for stuff to used within the year. It's overkill but I keep a little fantovo 3ml vial container for stuff I'm going to access in the next few weeks. It keeps me from having to open the hydrapeaks as much. A little OCD, I know. I agree with you that the hydrapeaks are little tough to open. I just look at it as having a good seal.
-
I have a few thousand vials on ice. I use the sensor below in two freezers at two locations. It emails me if there is a temperature fluctuation out of a range i set. It's a free service. I have wifi and internet on a ups system and the sensor as well. Its good for about 6 hours and in that time i would know if power is out by a temp shift.
I had a freezer fail and this told me otherwise i would have never known.
-
Also the intitial question. I did the same test with a similar sensor a while back. I saw 2 degree swings in the vault we used to sell and 4-5 degrees in the hydrapeak.
The swings arent going to ruin your stuff over a few years but I just opted for -20 deep freezers that need to be manually defrosted every few years.
-
Also the intitial question. I did the same test with a similar sensor a while back. I saw 2 degree swings in the vault we used to sell and 4-5 degrees in the hydrapeak.
The swings arent going to ruin your stuff over a few years but I just opted for -20 deep freezers that need to be manually defrosted every few years.
-
First, where did you get those sensors from? And for me, I have one hydropeak in my chest freezer and one in the fridge (I access this one the most). With proper storage in the fridge, they should be good for at least a year. The only issue I have is with my hydropeak. The majority of the time it is hard as hell to get the top to unscrew. I mean, it's just awful. I need to find some food-grade silicone grease to lubricate that seal.
It’s the standard Govee Wi-Fi sensor. It’s a large container; I sacrificed a tray to put my sensor inside. (It still holds about 90 vials.) This one also holds a good amount of desiccant.
Please delete if not allowed
https://www.etsy.com/listing/4482825258/helixcomb-144-3ml-peptide-vial-storage?ref=yr_purchases@MikeMiranda Very cool I can easily make these trays and 3d print them. Now I need to find the container.
-
@MikeMiranda Very cool I can easily make these trays and 3d print them. Now I need to find the container.
@MikeMiranda Very cool I can easily make these trays and 3d print them. Now I need to find the container.
temu/aliexpress search for stainless food container
-
Also the intitial question. I did the same test with a similar sensor a while back. I saw 2 degree swings in the vault we used to sell and 4-5 degrees in the hydrapeak.
The swings arent going to ruin your stuff over a few years but I just opted for -20 deep freezers that need to be manually defrosted every few years.
The swings arent going to ruin your stuff over a few years but I just opted for -20 deep freezers that need to be manually defrosted every few years.
When you say a FEW years, what's that estimation? 3 or 4? Anything longer may become suspect? I know it's not possible to pinpoint an exact timeframe. I'm just looking for a safe guideline of numbers to go by. Like I mentioned, this allotment is approximatley 8-10 years worth. If the guideline is 3 or 4 years in a refrigerator freezer and 5-10 years chest freezer and infinity in a deep -20 degree freezor, I have something to guide how my stashing for the future will proceed. I'm trying determine if it's overkill to buy a chest freezer for a relatively small amount of vials, or possibley just not stash so much for the future. Please excuse my harping on more concrete numbers. My OCD tends to seep out from time to time and it's pain the a$$.
-
@MikeMiranda Very cool I can easily make these trays and 3d print them. Now I need to find the container.
@MikeMiranda Very cool I can easily make these trays and 3d print them. Now I need to find the container.
I think you could actually store vials in the Tupperware that comes with it; just leave room for desiccant.
-
I have a Apache 2800 that hold 36Kits (Desiccant holder an temp sensor took some space) that will be my freezer stroage eventually
@MikeMiranda That's a fantastic idea for storage. Gotta love Harbor Freight. I have two of the Apache rifle cases and love them!
-
I just got back from Costco. They have a Frigidaire gravity convection refrigerator/freezer (separate compartments) for $230. I wish I had got that one for peptides.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login