Hospira 0.9% Bacteriostatic Sodium Chloride (30 mL)
-
@JtCjEfF I really like that site, PeptideFox. @mrjoshua44 gets the credit; it's a good one. Just don't make the mistake of signing up; they will harass you for the monthly fee. I asked the AI a question and then was asked to sign up, which I did, and now every time I get the pop up. And of course I am considering it lol
-
@Commander Hospira Sodium Chloride BAC water. It's actually a lot cheaper than standard BAC water, which makes no sense. I ordered it here. https://peptidetest.com/products/pfizer-hospira-bacteriostatic-sodium-chloride-for-injection-30-ml
For me, it made a big difference on day one.
@Commander Hospira Sodium Chloride BAC water. It's actually a lot cheaper than standard BAC water, which makes no sense. I ordered it here. https://peptidetest.com/products/pfizer-hospira-bacteriostatic-sodium-chloride-for-injection-30-ml
For me, it made a big difference on day one.
SS31, you bet it works. NAD buffered, hmm, IDK, wouldn't try it.
I want to know if I can use it with CARTALAX? That stings the hell out of me!
-
So I just bought a case from Medex, I will give it a try with Mots-c and SS-31. I sm up in the air about trying it with my NAD. The vendor says it is buffed, but it doesn’t sting a little. It it is buffed NAD and I use this what will happen so I know it isn’t any good?
-
Well, I can't for the life of me remember the source I used, but I remembered I posted this on an older thread, talking about the Bacteriostatic 0.9% NaCl solution. I'll keep trying to find the source I used.
most water-soluble peptides work well with BAC 0.9% Sodium Chloride; GLP-1 agonists (semaglutide, tirzepatide, retatrutide), Growth hormone secretagogues (CJC-1295, ipamorelin, sermorelin), Healing peptides (BPC-157, TB-500), Cognitive peptides (Selank, Semax).
Critical Exceptions
Copper-Containing Peptides GHK-Cu and AHK-Cu, NAD+ and the following require more of an acidic dissolution; IGF-1 LR3, IGF-1 DES, MGF, PEG-MGF, Follistatin, and Melanotan I.For my own research purposes, I've only used it for MOTS-c and SS-31 to reduce injection site reactions.
-
Well, I can't for the life of me remember the source I used, but I remembered I posted this on an older thread, talking about the Bacteriostatic 0.9% NaCl solution. I'll keep trying to find the source I used.
most water-soluble peptides work well with BAC 0.9% Sodium Chloride; GLP-1 agonists (semaglutide, tirzepatide, retatrutide), Growth hormone secretagogues (CJC-1295, ipamorelin, sermorelin), Healing peptides (BPC-157, TB-500), Cognitive peptides (Selank, Semax).
Critical Exceptions
Copper-Containing Peptides GHK-Cu and AHK-Cu, NAD+ and the following require more of an acidic dissolution; IGF-1 LR3, IGF-1 DES, MGF, PEG-MGF, Follistatin, and Melanotan I.For my own research purposes, I've only used it for MOTS-c and SS-31 to reduce injection site reactions.
@mrjoshua44 it was peptidefox I think
-
So I just bought a case from Medex, I will give it a try with Mots-c and SS-31. I sm up in the air about trying it with my NAD. The vendor says it is buffed, but it doesn’t sting a little. It it is buffed NAD and I use this what will happen so I know it isn’t any good?
@Commander me too how dumb is it that it’s so much less than hospital bac. 110 a case l. Yes people 4:40 a bottle. How much you think they mark up Hospira Bac. https://medexsupply.com/bacteriostatic-sodium-chloride-0-9-injection-30-ml-25-box/?sku=PFZ-00409196607&gad_source=1&gad_campaignid=22733881887&gbraid=0AAAAADmq-DfAUpAdtznTUiTKY3YlmibuR&gclid=Cj0KCQjw--7UBhCpARIsAGJBptgKDNyE_ZK3yxtj5HLDkPCH3PZYK1CQbfGgrbClbCwOKOWKilNa_CEaApY_EALw_wcB
Just wait we create demand and it will be $16
-
@Commander https://peptidefox.com/content/reconstitution posted above seems like it’s ok
-
@Commander https://peptidefox.com/content/reconstitution posted above seems like it’s ok
@Commander https://peptidefox.com/content/reconstitution posted above seems like it’s ok
So if I understand this right, you can use jt for Buffered NAD
-
@Commander https://peptidefox.com/content/reconstitution posted above seems like it’s ok
So if I understand this right, you can use jt for Buffered NAD
@Commander Yes sir!
-
Just chiming in because the added salt can actually be an issue here. It can cause some peptides to aggregate or precipitate, basically clump up or come out of solution. Depends on the peptide, concentration and formulation, so “I’ve used it without a problem” isn’t a blanket green light for everything.
It won’t automatically ruin every vial, but I wouldn’t casually swap it for regular BAC water either.
-
Just chiming in because the added salt can actually be an issue here. It can cause some peptides to aggregate or precipitate, basically clump up or come out of solution. Depends on the peptide, concentration and formulation, so “I’ve used it without a problem” isn’t a blanket green light for everything.
It won’t automatically ruin every vial, but I wouldn’t casually swap it for regular BAC water either.
Just chiming in because the added salt can actually be an issue here. It can cause some peptides to aggregate or precipitate, basically clump up or come out of solution. Depends on the peptide, concentration and formulation, so “I’ve used it without a problem” isn’t a blanket green light for everything.
It won’t automatically ruin every vial, but I wouldn’t casually swap it for regular BAC water either.
So I have been getting some lumps and ISR from MOTS-C, NAD+ and SS-31 and sometimes KLOW. I was going to try it with them. Just not sure how to tell if it didn’t work or not….
I am going to try it on my NAD+ -
Just chiming in because the added salt can actually be an issue here. It can cause some peptides to aggregate or precipitate, basically clump up or come out of solution. Depends on the peptide, concentration and formulation, so “I’ve used it without a problem” isn’t a blanket green light for everything.
It won’t automatically ruin every vial, but I wouldn’t casually swap it for regular BAC water either.
So I have been getting some lumps and ISR from MOTS-C, NAD+ and SS-31 and sometimes KLOW. I was going to try it with them. Just not sure how to tell if it didn’t work or not….
I am going to try it on my NAD+@Commander I have only used it on SS31 and MOTSC everything seems to say it’s ok for those two unless I missed something. It most definitely helped in terms of ISR. I didn’t do it for NAD buffered because the opinions differ and that one buffered doesn’t bother me.
@randy can you let us know if it’s ok for MOTS and SS31
-
@Commander I have only used it on SS31 and MOTSC everything seems to say it’s ok for those two unless I missed something. It most definitely helped in terms of ISR. I didn’t do it for NAD buffered because the opinions differ and that one buffered doesn’t bother me.
@randy can you let us know if it’s ok for MOTS and SS31
-
@Stevepep I have no information on which ones are okay and which ones aren't. It can be dose dependent, it can be affected by any TFA salts left behind. There are so many variables there's no way to really know and it's why I just avoid it
-
@Randy thanks was hoping I found the solution for the mots c red welt. It does make a big difference
-
@Randy thanks was hoping I found the solution for the mots c red welt. It does make a big difference
-
A big YES for SS-31. Pansy I am. Definitely works!
@commander I see a number of protocols recommending salt BAC for MOTS-C. With all you must have stored, burn one and see. I bet it works...
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login