What 3D printer should I order and lets put some files here
-
@Stevepep Getting the prints on the top are pretty straightforward and you can do it right in the slicer. If you're using Bambu Studio, click the part, go to the Text tool, then I typically select the option to "Add as a Modifier" then change the filament for that part so you get the color difference.
I did a bunch of containers for a Nexaph order for the freezer and labeled the tops, kinda just cuz.
-
@kristoferfriers Thanks so much I didnt see that file for those containers can you add that one.
-
@mr_acero way too cool! I assume you'd need that upgrade kit to print multiple colors like that. That seems like a non-negotiable...l need it!
-
That H2C looks incredible! I may need to dip my toe in the shallow end before driving that muscle car.
It looks like your black cases above are using matte filament. Is that correct?
Now looking at the A1 and not the mini.
@hunt_ak Yeah, Matte PLA. I particularly like the Sunlu High Speed PLA for most prints. Pretty inexpensive and makes nice looking parts.
If anyone is looking for another print, I just finished designing this one and published it just now. Since both of us are researching a few things, we tend to stock up on pen tip needles so this fits about 300 tips and just about a box of prep pads:
-
@hunt_ak Yeah, Matte PLA. I particularly like the Sunlu High Speed PLA for most prints. Pretty inexpensive and makes nice looking parts.
If anyone is looking for another print, I just finished designing this one and published it just now. Since both of us are researching a few things, we tend to stock up on pen tip needles so this fits about 300 tips and just about a box of prep pads:
-
@hunt_ak Yeah, Matte PLA. I particularly like the Sunlu High Speed PLA for most prints. Pretty inexpensive and makes nice looking parts.
If anyone is looking for another print, I just finished designing this one and published it just now. Since both of us are researching a few things, we tend to stock up on pen tip needles so this fits about 300 tips and just about a box of prep pads:
-
@mr_acero said:
I particularly like the Sunlu High Speed PLA
Thanks for the tip! I'll grab some of that. Pulled the trigger on an A1, not the mini. More to come
-
@Stevepep Getting the prints on the top are pretty straightforward and you can do it right in the slicer. If you're using Bambu Studio, click the part, go to the Text tool, then I typically select the option to "Add as a Modifier" then change the filament for that part so you get the color difference.
I did a bunch of containers for a Nexaph order for the freezer and labeled the tops, kinda just cuz.
-
This is a deep rabbit hole to explore, welcome to the asylum!
-
This is a deep rabbit hole to explore, welcome to the asylum!
-
@Navy-Chief is there a peptide for this
-
I think it was this one but he had an affiliate link: https://www.amazon.com/gp/aw/d/B0GQMJ8QQT/
@ResearchCat Thats the one but buy direct from bambulab.
https://us.store.bambulab.com/products/a1-mini?from=navigation
If you can spend a bit more and get a bigger print volume (and have the room) https://us.store.bambulab.com/products/a1?from=navigation
and if you just wanna blow some money anything in the H series is great.
-
I love my Bambu A1 mini and have been wearing it out. lol I know at some point in the future, I will get a bigger printer.
-
-
-
Gobs of matte SUNLU filament headed my way based off @krisacero recommendation. Printer and supplies will show up next week. Hoping the A1 comes with everything to get started.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login