Nexaph 3rd Party Testing
-
Nexaph is highly tested. You can even find 3rd party testing which gets into endos and other more extensive testing on TG.
-
That's a valid concern, and why Janoshik keeps all the COA's they've done public so you can personally verify it. Go to https://janoshik.com/verification/. Plug in the Task Number and Unique Key Verification located on the Nexpah COA and confirm it's the same as the one Janoshik has.
-
Most vendors I have seen/bought from don’t have endo testing. The COA you get from Nexaph is based on the vials sent to Janoshik by users. One would think that paying customers sending vials they bought in to Janoshik for testing paid for by Nexaph is as reputable if not more so than testing the vendor did on their own without any transparency.
-
That's a valid concern, and why Janoshik keeps all the COA's they've done public so you can personally verify it. Go to https://janoshik.com/verification/. Plug in the Task Number and Unique Key Verification located on the Nexpah COA and confirm it's the same as the one Janoshik has.
-
Most vendors I have seen/bought from don’t have endo testing. The COA you get from Nexaph is based on the vials sent to Janoshik by users. One would think that paying customers sending vials they bought in to Janoshik for testing paid for by Nexaph is as reputable if not more so than testing the vendor did on their own without any transparency.
@ResearchCat the endotoxin testing is an interesting topic. According to the Jano guy with purity levels well over 90 pct it’s impossible for the toxins to be high enough not to pass so it’s unnecessary testing.
-
Most vendors I have seen/bought from don’t have endo testing. The COA you get from Nexaph is based on the vials sent to Janoshik by users. One would think that paying customers sending vials they bought in to Janoshik for testing paid for by Nexaph is as reputable if not more so than testing the vendor did on their own without any transparency.
Most vendors I have seen/bought from don’t have endo testing. The COA you get from Nexaph is based on the vials sent to Janoshik by users. One would think that paying customers sending vials they bought in to Janoshik for testing paid for by Nexaph is as reputable if not more so than testing the vendor did on their own without any transparency.
So you are saying that the COA which Nexaph supplies on their website are not from vials they themselves sent to Jano? He just uses the COA provided by the third party vendor sponsored group?
When I've compared the two COA's they are different. Different dates and task numbers but with the same vial batch number.
-
I’m a noob as well but the way I understand it is the Nexaph telegram group is used so that researchers donate a sample from their own kits and Nexaph pays for the test. My understanding is that this gives researchers a reasonable assumption that the company didn’t “hand pick” certain samples they knew would look good on a COA. Thus making it more of a “random” and “fair” test. They only test for mass content and purity. So the benefit of a third party group test in my eyes would be that researchers could do more tests, (sterility, endotoxins, heavy metals) and a plus would be that you could get more samples to average out mass content. Being new to a lot of this. I will do the third party group testing. It just makes me feel more warmer and fuzzier inside.
-
If anyone knows it would be interesting to get an answer. If purity is over 99pct most are over 99.5pct is it even statistically possible to have enough endotoxins or heavy metals to fail? The Jano guy straight up said it’s a waste of time. (I am paraphrasing) the Nexaph people apparently feel this way. Same for sterility. Most people believe the difference between 99.5 and 100 or whatever is just moisture from the manufacturing process or degradation. We see this is the random testing on telegram they always pass in the Nexaph threads.
-
@nuncles You might be right. I assumed they are the same. The COA’s for batches I have purchased have not been available until the customer testing was done and seemed to match.
-
Hopefully this doesn't open a can-o-worms, but are there worse offender(s) than others that are at failing such test at a higher rate? There are only a handful of API producers (5-6?) that I'm aware of and then probably double that or more in finishers/packagers. Are weaker producers making products with lower quality that show in testing results?
-
Hopefully this doesn't open a can-o-worms, but are there worse offender(s) than others that are at failing such test at a higher rate? There are only a handful of API producers (5-6?) that I'm aware of and then probably double that or more in finishers/packagers. Are weaker producers making products with lower quality that show in testing results?
-
@markgroce purepeptides has fake COA’s there are several others. When I was a noob I ordered from there and let’s just say my rat had a bad experience
-
@markgroce purepeptides has fake COA’s there are several others. When I was a noob I ordered from there and let’s just say my rat had a bad experience
-
If anyone knows it would be interesting to get an answer. If purity is over 99pct most are over 99.5pct is it even statistically possible to have enough endotoxins or heavy metals to fail? The Jano guy straight up said it’s a waste of time. (I am paraphrasing) the Nexaph people apparently feel this way. Same for sterility. Most people believe the difference between 99.5 and 100 or whatever is just moisture from the manufacturing process or degradation. We see this is the random testing on telegram they always pass in the Nexaph threads.
@Stevepep I wonder about the details of this "purity test". What does this 99.5% represent? In the vials we usually see a puck or a tablet-like mass, which has a volume of a something weighting about 1 gram, while the active component may be listed as 10 mg.
Imagine 1 g of salt for instance, a quarter of a teaspoon (1 g), vs. a few grains of salt (10 mg).
The majority of the volume, 99% in this case, is not the active ingredient, it is the "excipients", like glycine or mannitol. I wonder, this 99.5% purity, it is percentage of what? It can't be of the total mass, right? So, it is of the mass of the active ingredient. For that they need to separate it from everything else like those excipients and whatever else is there.
How does this testing perform it? What else is excluded? It is very easy to imagine the dangerous level of heavy metals, bacteria and their derivatives (endotoxins) in 1 gram of a solid matter. -
I’m a noob as well but the way I understand it is the Nexaph telegram group is used so that researchers donate a sample from their own kits and Nexaph pays for the test. My understanding is that this gives researchers a reasonable assumption that the company didn’t “hand pick” certain samples they knew would look good on a COA. Thus making it more of a “random” and “fair” test. They only test for mass content and purity. So the benefit of a third party group test in my eyes would be that researchers could do more tests, (sterility, endotoxins, heavy metals) and a plus would be that you could get more samples to average out mass content. Being new to a lot of this. I will do the third party group testing. It just makes me feel more warmer and fuzzier inside.
@WesEqualshXc You can get links to 3rd party testing groups from the Nexaph TG groups. And that is where all the added testing comes in you'd like to see.
-
@Stevepep I wonder about the details of this "purity test". What does this 99.5% represent? In the vials we usually see a puck or a tablet-like mass, which has a volume of a something weighting about 1 gram, while the active component may be listed as 10 mg.
Imagine 1 g of salt for instance, a quarter of a teaspoon (1 g), vs. a few grains of salt (10 mg).
The majority of the volume, 99% in this case, is not the active ingredient, it is the "excipients", like glycine or mannitol. I wonder, this 99.5% purity, it is percentage of what? It can't be of the total mass, right? So, it is of the mass of the active ingredient. For that they need to separate it from everything else like those excipients and whatever else is there.
How does this testing perform it? What else is excluded? It is very easy to imagine the dangerous level of heavy metals, bacteria and their derivatives (endotoxins) in 1 gram of a solid matter.@vpeptides I just read this yesterday and it helped me to understand the purity numbers.
https://peptidecritic.com/blog/why-test-results-vary-between-labs-multi-lab-coa-comparison
-
Another article I read yesterday... that I cannot find currently, also described "purity" as the amount of the total sample that tests at the peptide marker. (the spike on the graph of a COA). So Im liking @stevepep idea that if a sample volume contains 99.8% of that specific chemical, then it has no room for much else. Had not thought that through before.
-
Another article I read yesterday... that I cannot find currently, also described "purity" as the amount of the total sample that tests at the peptide marker. (the spike on the graph of a COA). So Im liking @stevepep idea that if a sample volume contains 99.8% of that specific chemical, then it has no room for much else. Had not thought that through before.
@JtCjEfF I don't think this idea is valid. HPLC curve shows a spike and from it the ingredient can be identified by the timing, and quantified by the area under curve. Purity seems like is basically AUC for the spike / total AUC. But! Where is the spike for the filler? Whatever it is, mannitol, sorbitol, they should have it's own, massive spike, because the proportions are like 1/100. Obviously this spike is filtered out, what else can be done here? So, my question remains, what else can be filtered out from the graph? HPLC usage is limited to those single molecules we know and can identity, and the rest is unknown.
-
Most vendors I have seen/bought from don’t have endo testing. The COA you get from Nexaph is based on the vials sent to Janoshik by users. One would think that paying customers sending vials they bought in to Janoshik for testing paid for by Nexaph is as reputable if not more so than testing the vendor did on their own without any transparency.
So you are saying that the COA which Nexaph supplies on their website are not from vials they themselves sent to Jano? He just uses the COA provided by the third party vendor sponsored group?
When I've compared the two COA's they are different. Different dates and task numbers but with the same vial batch number.
@Nuncles Nexaph does both. They send in vials and there is a group where customers send in vials to Janoshik and Nexaph pays for it. The results are posted in the TG group. It will be a couple weeks after the presale ends before the first COAs come in. Then another few weeks before the customer provided vial results come back.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login