What 3D printer should I order and lets put some files here
-
Forgot to post the files for the Open Hospira Bac Water Holder https://makerworld.com/en/models/3019649-hospira-bac-water-holder#profileId-3392500
-
I printed these for filtering and reconstituting my pen vials with a little garbage can. It makes life much easier. Let me know if you are interested and I will put it on Makers and share the file. That empty section is for luer locks. It helps keep things sanitary as well.
Here is the file: https://makerworld.com/en/models/3062759-pen-vial-reconstitution-tray#profileId-3446860
-
@randy had to do it. It works great but totally unnecessary.
I tried this one and it would not work for me. Now I was just testing it by turning it with my hand but it just wouldn’t move. It was like it was to tight. I’m going to try again at some point.
-
-
-
I had to update the file for the travel cooler I created. It got corrupted and wasn't showing the full print file, so here we go again. My wife thinks it was the person who stole it twice and was listing them on Etsy. So here it is, and it works great. Holds 2 pens, two pen vials, a cooler pack (the link is on makers), and syringes in a screw-off lid.
-
Just wondering. Did the gears keep backing out on you and if so, what did you do to keep that from happening?
@afkar7 you have to glue the ones that don’t clip in. I just put a drop of glue be carful not to glue the rollers to the frame. I also glued the motor. Little trial and error but it works great. NAD was a real pain I just put it on that for a couple of minutes and it worked terrific
-
@afkar7 you have to glue the ones that don’t clip in. I just put a drop of glue be carful not to glue the rollers to the frame. I also glued the motor. Little trial and error but it works great. NAD was a real pain I just put it on that for a couple of minutes and it worked terrific
@afkar7 you have to glue the ones that don’t clip in. I just put a drop of glue be carful not to glue the rollers to the frame. I also glued the motor. Little trial and error but it works great. NAD was a real pain I just put it on that for a couple of minutes and it worked terrific
Figured but just wanted to check, thanks. I was surprised how quick it turned with that 150rpm motor.
-
I am glad i found this post, i love 3D printing. Anyone find a good file for a pen cap dispenser only?
-
Personally picked up a few of these on a great deal at 151 eavh delivered and been having a blast wih them, im new too it and learning and loving it!!
-
1 of my many many projects! Made a ton of stuff from this too the vault and you name it
-
Made something similar too the one that was shown on the channel for my vault and its been great so far, my cure for the tight seal and hard too open was food grade silicon grease, i put that on the threads of the lid and seal, now its smooth as butter when i neeed too break out some cold storage peps!!
-
Made something similar too the one that was shown on the channel for my vault and its been great so far, my cure for the tight seal and hard too open was food grade silicon grease, i put that on the threads of the lid and seal, now its smooth as butter when i neeed too break out some cold storage peps!!
Made something similar too the one that was shown on the channel for my vault and its been great so far, my cure for the tight seal and hard too open was food grade silicon grease, i put that on the threads of the lid and seal, now its smooth as butter when i neeed too break out some cold storage peps!!
Is that insert for 10ml or 3ml vials? Also where did you find the file? I bought that same container, both the 1500 & 2000 and am looking for inserts file to print.
-
What would you guys recommend to make for apache 1300s to apache 4800s? I am trying to just get one machine to do it all. I have about 50 apache waiting to get retrofitted. Any help on a 3d printer would be much appreciated
-
What would you guys recommend to make for apache 1300s to apache 4800s? I am trying to just get one machine to do it all. I have about 50 apache waiting to get retrofitted. Any help on a 3d printer would be much appreciated
What would you guys recommend to make for apache 1300s to apache 4800s? I am trying to just get one machine to do it all. I have about 50 apache waiting to get retrofitted. Any help on a 3d printer would be much appreciated
-
I inherited an Ender 3 Pro and hauled it down from my son's closet. I thought it might be fun to play with. It's been sitting on the dining room table while I've watched videos. Decided I don't want to do it enough to level it and learn everything. I'm happy to give this to someone. He warned me that the big spools of filament might be brittle after so many years. It's probably 5-7 years old. If it is of use to anyone, you can just pay for it to ship.
](https://makerworld.com/en/models/3065513-travel-cooler-for-insulin-peptide-pen#profileId-3450401!%5BIMG_7179.jpeg%5D(/assets/uploads/files/1784391221357-img_7179.jpeg)){kind=link}
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login