Buying "local" vs China Direct
-
@Mydogdaryl423
Yes saved a lot of money. I bought Reta 20mg 20 Kits, I think it was $85 a kit after shipping. Testing was $250 for one lab to test it… Nexaph is $468 a kit for Reta 20mg - and you still have to test it.
The 5 labs tests we did were not to test the product, it was to test the labs to see how close they were to each other. Normally you just send it to one good lab to test.
Jeff wanted to test a bunch of different labs, he really can’t send to all of them because they will know it is him. I sent it to a few and he sent it to a few. I am sure he will post an article or something on it...So what does the testing do for you? Let's say you do a test and it comes back with low purity. What can you do? Just not use that batch?
@montemontemayor
Testing lets me know I have KPV and not MT2, Reta and not Tirz, it letsw me know the SS-31 is 40mg nit 50mg as the vendor stated…
Some Vendors will reship if a Jano test comes back bad. I do not use Jano - WAY too expensive.
I second what Jeff said, it is getting harder and harder to find good Grey Market Vendors. And when yo do, they are only good for a couple months and then they go bad... -
@montemontemayor Happy you're here!
Just want to be clear on something. Because a vendor is on the website does not mean they're a good vendor.
I second what others have said about nexaph.
I may have ordered successfully from China countless times but I can tell you it's getting harder and harder and the quality is going down.
-
Looking at echemi makes me really wonder if this entire industry is a inside joke im not in on. That being said.
-
Looking at echemi makes me really wonder if this entire industry is a inside joke im not in on. That being said.
-
@quicksilver80 is echemi legit? as in, has anyone tried and confirmed ordering through that route? i wonder if is this where the wholesalers get their stuff so cheap
-
Have you looked into Ion peptide? I have using them for a while now and they are one of best vendors i have seen so far.
-
I’ve had good luck the past 6 months with Yuansense Tech. The boxes come with a MFG and Expiry dates. You can trace back to the Janoshik COA they link to. That’s for a bit of peace of mind, but I still send one of each “lot” to Krause Analytical for confirmation. I don’t do the 3 vials like Nexaph or the 8 vials like Southern Aminos. But one per actual lot, usually no more than 20 or 30 vials (2 or 3 boxes) lets me know ID, Purity, fill mg, and Endo. For 20mg Tirz with 3 boxes it works out to about $16 per vial. Not cheap, but about 3/5 Nexaph and 1/5 of SA.
-
I’ve had good luck the past 6 months with Yuansense Tech. The boxes come with a MFG and Expiry dates. You can trace back to the Janoshik COA they link to. That’s for a bit of peace of mind, but I still send one of each “lot” to Krause Analytical for confirmation. I don’t do the 3 vials like Nexaph or the 8 vials like Southern Aminos. But one per actual lot, usually no more than 20 or 30 vials (2 or 3 boxes) lets me know ID, Purity, fill mg, and Endo. For 20mg Tirz with 3 boxes it works out to about $16 per vial. Not cheap, but about 3/5 Nexaph and 1/5 of SA.
@mikebricker Is Krause doing endo from the same vial used for ID, purity, and content? Am I reading that right?
-
@mikebricker Is Krause doing endo from the same vial used for ID, purity, and content? Am I reading that right?
@Stevepep Yes. They told me they did not require a separate vial for Endo. Is that not kosher technically? Not knowledgeable in this area, just a Nuclear Engineer.
-
@Stevepep Yes. They told me they did not require a separate vial for Endo. Is that not kosher technically? Not knowledgeable in this area, just a Nuclear Engineer.
@mikebricker nuclear engineer, that's cool. The standard is typically to use a separate vial in a clean room to test for endotoxins so you don't get a false positive or negative. You try to keep the samples separate so they don't get contaminated. Endotoxin testing is tricky. I test for the usual plus sterility for this reason. I have never used Krause. I assume you use them through Finnrick. Jansoshik covered this a little bit in a video and I think said they use seperate vials for heavy metals, Sterility and endotoxins. I think one for each
-
@eurouser ive never got a solid answer from anyone else. So i have no idea. Atx at 8 a kilo seems attractive though lol
-
Have you looked into Ion peptide? I have using them for a while now and they are one of best vendors i have seen so far.
@tylerbrooks its blocking any access to the site on my end, regardless of which VPN location i use or no VPN at all. Not sure if its just on my end.
-
I’ve had good luck the past 6 months with Yuansense Tech. The boxes come with a MFG and Expiry dates. You can trace back to the Janoshik COA they link to. That’s for a bit of peace of mind, but I still send one of each “lot” to Krause Analytical for confirmation. I don’t do the 3 vials like Nexaph or the 8 vials like Southern Aminos. But one per actual lot, usually no more than 20 or 30 vials (2 or 3 boxes) lets me know ID, Purity, fill mg, and Endo. For 20mg Tirz with 3 boxes it works out to about $16 per vial. Not cheap, but about 3/5 Nexaph and 1/5 of SA.
@mikebricker are their prices (on the name(.)com site) per vial or per kit of 10 vials? cause i checked 30mg Reta and its 205 dollars, which is very high price compared to buying kits.
-
@mikebricker are their prices (on the name(.)com site) per vial or per kit of 10 vials? cause i checked 30mg Reta and its 205 dollars, which is very high price compared to buying kits.
-
@mikebricker nuclear engineer, that's cool. The standard is typically to use a separate vial in a clean room to test for endotoxins so you don't get a false positive or negative. You try to keep the samples separate so they don't get contaminated. Endotoxin testing is tricky. I test for the usual plus sterility for this reason. I have never used Krause. I assume you use them through Finnrick. Jansoshik covered this a little bit in a video and I think said they use seperate vials for heavy metals, Sterility and endotoxins. I think one for each
@Stevepep Not through Finnrick. IMHO Finnrick is a joke. I go through Krause directly. Easy to work with, and very good pricing.
-
Have you looked at Nexaph? They are a good middle ground with COAs and no need for bitcoin. At least for now on my bulk stuff I'm using them instead of full grey market.
Yes, I bought some KPV from them but TBH, I was sort of off put because I got a box w the barcode but the vials had no stickers whatsoever. Is that normal?
@montemontemayor That is standard across most vendors when buying kits.
-
@eurouser They are kits of ten vials.
@mikebricker thank you. It would be cool if they made it clearer on their website
yuansensetech.com but i'll take your word for it. Appreciate the info. -
Have you looked at Nexaph? They are a good middle ground with COAs and no need for bitcoin. At least for now on my bulk stuff I'm using them instead of full grey market.
no need for bitcoin
@montemontemayor Oh although if you want discount, Nexaph has an option to use BTC. So I agree they are a great middle ground.
I knew about them even before my first RUO from Glp1forum and some Reddit posts, but Peptide Critic brought more clarity and trust.
-
@ResearchCat
I am sending out for testing myself. I want test from the product that I actually receive. People put WAY to much trust in those group 3rd party testing… How do you know the person the sent it in has the same batch as you? The vendors use the same caps over multiple batches. Group testing cannot be trusted in my opinion.
I buy in somewhat bulk. I bought 20 Kits of Reta 20mg to get bulk pricing, but only 14 were for me, my friend took 5 and one kit we sent out to 5 different labs for testing so we could evaluate the labs. Everything else I try to buy 10 kits at a time or if my friend wants the same thing we split it and buy like 12 kits (6 each). But after I figured out how much I was really using a year, I have to step it up and buy at least 10 kits or more at a time just for me and my wife.@Commander I actually love and appreciate your skepticism and DIY approach, just that I'm quite lazy and spoilt by Amazon Prime readymade culture.
But one day when I'm ready to put in the time and effort to buy bulk and save money while ensuring safety, I will ping you for guidance.
-
This post is deleted!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login