Discussion: Nexaph
-
I started it Dec 1, 3X per week (10mg split). Took it continuously until Jan 19 when I had a reconstruction surgery from my previous cancer surgery. Was off it for 2 weeks then. Started back up and ended up in the hospital on 3/3 with cellulitis in my surgery site, so off it about a week. Started back up and have been taking it ever since.
I probably sound like an unhealthy person, but I am the healthiest "sick" person around, lol I had cancer 10 years ago, no evidence of disease after 1.5 years of treatment. Now, I am dealing with the problems caused by chemo, the gift that keeps on giving. I take GHK-cu to improve my skin that took a beating from it, TA-1 to support my immune system and MOTS-c to support my mitochondria. I feel great, I'm lean with low body fat and I am a personal trainer/fitness instructor.
I am planning on cycling off in 3 weeks when I finish this vial. Not sure how long I should stay off.
@jackie You will find a lot of different info on cycling MOTs-C. Along with many different dosing protocols. I ran a cycle of 8 weeks in my test subject and then washed out for 8 weeks. He has a history of cancer and surgeries and has been continually getting gifts from radiation and chemo as well. I think the first 8-week cycle was a bit long, as the effects of the MOTs-C started to wane, but I also think the 8-week washout was a bit long, as the energy was severely lagging by week 6. So I've moved to a 4/4 cycle as the next step. With this latest cycle, the increase in energy and focus during workouts is incredible. Dosing is 5mg 2x/wk fasted in the AM. I found a lot of washout info, but it seemed that much of what I read was equal on/off for the cycle. Good Luck
-
Anyone purchased NAD+ from Nexaph? Waiting on Mots-c to arrive. Never used the company, a little nervous, because in the samples of the NAD+, the 3rd sample was quite a bit less than the other 2 vials. (Although all were overfills)
-
I have and I love it. The latest batch, which i have, tested ~520, 523, 503, which isn’t much given the fill level and typical dosing. If you recon to the average and are researching 50 or 100mg, you’re within ~1mg either way.
FWIW, their MOTS-C is also great. you’ll be very pleased with the results your rat gets with these.
-
@jackie You will find a lot of different info on cycling MOTs-C. Along with many different dosing protocols. I ran a cycle of 8 weeks in my test subject and then washed out for 8 weeks. He has a history of cancer and surgeries and has been continually getting gifts from radiation and chemo as well. I think the first 8-week cycle was a bit long, as the effects of the MOTs-C started to wane, but I also think the 8-week washout was a bit long, as the energy was severely lagging by week 6. So I've moved to a 4/4 cycle as the next step. With this latest cycle, the increase in energy and focus during workouts is incredible. Dosing is 5mg 2x/wk fasted in the AM. I found a lot of washout info, but it seemed that much of what I read was equal on/off for the cycle. Good Luck
@Chuxpeps said in Discussion: Nexaph:
@jackie You will find a lot of different info on cycling MOTs-C. Along with many different dosing protocols. I ran a cycle of 8 weeks in my test subject and then washed out for 8 weeks. He has a history of cancer and surgeries and has been continually getting gifts from radiation and chemo as well. I think the first 8-week cycle was a bit long, as the effects of the MOTs-C started to wane, but I also think the 8-week washout was a bit long, as the energy was severely lagging by week 6. So I've moved to a 4/4 cycle as the next step. With this latest cycle, the increase in energy and focus during workouts is incredible. Dosing is 5mg 2x/wk fasted in the AM. I found a lot of washout info, but it seemed that much of what I read was equal on/off for the cycle. Good Luck
Thank you! I will probably stay off it for a month and then go back on it.
-
I have and I love it. The latest batch, which i have, tested ~520, 523, 503, which isn’t much given the fill level and typical dosing. If you recon to the average and are researching 50 or 100mg, you’re within ~1mg either way.
FWIW, their MOTS-C is also great. you’ll be very pleased with the results your rat gets with these.
This post is deleted! -
I have and I love it. The latest batch, which i have, tested ~520, 523, 503, which isn’t much given the fill level and typical dosing. If you recon to the average and are researching 50 or 100mg, you’re within ~1mg either way.
FWIW, their MOTS-C is also great. you’ll be very pleased with the results your rat gets with these.
@ResearchCat Good to know! Yea, researching in the 50-100mg range, so that makes me feel better. Didn't see the purity level though. Would be my only other concern. Does this company typically provide products with good purity?
-
Yes, they usually publish purity and 99%+ is typical.
-
@ResearchCat Good to know! Yea, researching in the 50-100mg range, so that makes me feel better. Didn't see the purity level though. Would be my only other concern. Does this company typically provide products with good purity?
@angelajones They state 99% purity or money back guarantee. I’ve ordered 2x and expecting 3rd order to arrive today. You will need a label maker but the box comes with the QR code of the COA
-
@angelajones They state 99% purity or money back guarantee. I’ve ordered 2x and expecting 3rd order to arrive today. You will need a label maker but the box comes with the QR code of the COA
@beachfun just got my niimbot! Thanks! 1st order (Mots-C) arrives today.
-
@beachfun just got my niimbot! Thanks! 1st order (Mots-C) arrives today.
@angelajones said in Discussion: Nexaph:
@beachfun just got my niimbot! Thanks! 1st order (Mots-C) arrives today.
What Nimbot did you buy?
-
@angelajones said in Discussion: Nexaph:
@beachfun just got my niimbot! Thanks! 1st order (Mots-C) arrives today.
What Nimbot did you buy?
@Commander it says Niimbot B1. I found it on Amazon.
-
@Commander it says Niimbot B1. I found it on Amazon.
@angelajones
Oh, I made mine with the M2.
Will be making labels for these tonight. I love Nexaph packages…
-
@Commander I say this with the utmost respect. Based on your previous posts, I believe you and I are not nearly as tech savvy as others here. Seeing these labels gives me hope I’ll learn how to make labels when I get the Niimbot M2 I just ordered!
-
B1 pro for me the vintage look is nice but im a skinflint and function over form Print - On!
-
@Commander I say this with the utmost respect. Based on your previous posts, I believe you and I are not nearly as tech savvy as others here. Seeing these labels gives me hope I’ll learn how to make labels when I get the Niimbot M2 I just ordered!
@TBone
So here is how I did it with the Nimbot. I couldn’t design the labels on my phone or tablet (I am a techno peasant
)so I downloaded the Nimbot program onto my computer. Nimbot makes you create an account.
After all the labels were designed on my computer, then I signed into the Nimbot program on my iPad. I hooked the Nimbot M2 up to my iPad via bluetooth. Then I was able to print the labels with easy. I am sure the tech savvy people can do it all from their phone or iPad, I do not have that kind of skill.
As Randy pointed out, if you print 2 colors with the M2, you will only be able to use half the roll of labels because it counts them. So when you print 2 colors it thinks you are printing on twice the amount of labels.
So I wouldn’t recommend printing 2 colors unless you don’t care about loosing half the roll. I like the look of 2 colors labels, so I don’t mind it.. -
@TBone
So here is how I did it with the Nimbot. I couldn’t design the labels on my phone or tablet (I am a techno peasant)so I downloaded the Nimbot program onto my computer. Nimbot makes you create an account.
After all the labels were designed on my computer, then I signed into the Nimbot program on my iPad. I hooked the Nimbot M2 up to my iPad via bluetooth. Then I was able to print the labels with easy. I am sure the tech savvy people can do it all from their phone or iPad, I do not have that kind of skill.
As Randy pointed out, if you print 2 colors with the M2, you will only be able to use half the roll of labels because it counts them. So when you print 2 colors it thinks you are printing on twice the amount of labels.
So I wouldn’t recommend printing 2 colors unless you don’t care about loosing half the roll. I like the look of 2 colors labels, so I don’t mind it..@Commander This is great advice and much appreciated. I downloaded the app to my phone in preparation of getting the printer, hoping it would be intuitive and I could hit the ground running, but no luck. I am a techno peasant as well. I’ll try it from my computer now. I think the 2 color label looks great!
-
@Commander This is great advice and much appreciated. I downloaded the app to my phone in preparation of getting the printer, hoping it would be intuitive and I could hit the ground running, but no luck. I am a techno peasant as well. I’ll try it from my computer now. I think the 2 color label looks great!
