Klow Diy Math question
-
I have vials
GHK-CU 50 mg 3ml bac
Bpc157 10mg 2ml Bac
Tb500 10mg 2ml Bac
Kpv 10mg 2ml Bac
Cartalax 20 mg 3ml BacQuestion
- Do I Draw an equal portion from each vial and put into pen
- What would the dose be
Draw?
20 units Bpc157 @ 5 mg/ml
20 units Tb500 @ 5 mg/ml
20 units Kpv @ 5 mg/ml
20 units GHK-Cu @ 16.67 mg/ml
20 units Cartalax @ 6.67mg/mlDose: ?
Thanks in advance.
-
My two cents, it's easier to have it mixed before you injecting into a cartridge.
I just spent 3 hours diluting and mixing ghk-cu and kpv into cartridges myself. Granted I was not doing things optimally, and there was probably 10 things I could have done better.
Biggest thing I can immediately see would have been mixing in a 10mL syringe... That or injecting it into a 10mL vial. I drew things into 1mL syringes and injected into the cartridges. It was such a pain filtering things.
If you're dead set on it though, I would recommend an excel file to do all the math. -
20 U100 units is 0.2 ml so the dose will be obviously 1/1/1/3.3/1.3 per 100 units. One thing I would research is that Cu in GHK-Cu may interact with Cartalax (Ala-Glu-Asp) in a reconstituted blend, so it may quickly degrade into something else. It's not from a real experience, only theoretical, but the chemistry sounds convincing.
-
I make this all the time, I simply take my 5 vials, (bpc, tb, kpv, ghkcu, cartlax) I add 2.5 ML bac to bpc, let it sit for 20 min, I draw it out and add it to tb let it sit for 20 min, draw it out and add it to kpv draw it out and add it to cart wait 20 min, draw it out and add it to ghkcu this sometimes takes the longest to reconstitute. I use a 3ML syringe with 25G needle, I then add this to a 3ml vial and top off with bac water and let sit overnight before using.
-
I make this all the time, I simply take my 5 vials, (bpc, tb, kpv, ghkcu, cartlax) I add 2.5 ML bac to bpc, let it sit for 20 min, I draw it out and add it to tb let it sit for 20 min, draw it out and add it to kpv draw it out and add it to cart wait 20 min, draw it out and add it to ghkcu this sometimes takes the longest to reconstitute. I use a 3ML syringe with 25G needle, I then add this to a 3ml vial and top off with bac water and let sit overnight before using.
@brandenscheidecker that's so much smarter than what I did.
-
I make this all the time, I simply take my 5 vials, (bpc, tb, kpv, ghkcu, cartlax) I add 2.5 ML bac to bpc, let it sit for 20 min, I draw it out and add it to tb let it sit for 20 min, draw it out and add it to kpv draw it out and add it to cart wait 20 min, draw it out and add it to ghkcu this sometimes takes the longest to reconstitute. I use a 3ML syringe with 25G needle, I then add this to a 3ml vial and top off with bac water and let sit overnight before using.
@brandenscheidecker that’s genius!
-
That’s a good way @brandenscheidecker, pretty much how I do it. However, if you already have the vials reconed, the easiest way is one of these:
You have 12ml in total in your vials.
You get a 10mL sterile vial(it should fit 12mL) transfer it all to that vial, and fill your pens from there.
If you don’t have a 10ml vial, you divide each vial capacity into 4, and fill the pen cartridge one at the time.
GHK-CU 50 mg 3ml/4=0.75ml(12.5mg)
Bpc157 10mg 2ml/4=0.5ml(2.5mg)
Tb500 10mg 2ml/4=0.5 (2.5mg)
Kpv 10mg 2ml/4=0.5ml (2.5mg)
Cartalax 20 mg 3ml/4=15 mL·mg0.75ml (5mg) -
@brandenscheidecker and @snake-pepskin thank you.
-
S seadracos referenced this topic
-
@snake-pepskin I have 10ml vials.
To clarify, I have reconstituted vials.- Remove contents from vials place in the 10ml vial.
- Add to pen cartridges
- Question. What dosing do I follow. The same as klow or something different
Thank you for help
-
The KLOW 50/10/10/10 would be safest, but I prefer 50/10/15/15 though. Something I would recommend is putting GHK and KPV in one pen and the BPC+KPV (Wolverine) in another. They work very well together, but I personally use a lot more Wolverine than GHK.
Plus if you've never used GHK before it'll prevent you from tossing the entire thing out. It's really common to get stinging near the reaction site, and you may not just feel is worth it.
T.T I'm personally trying to figure out if I can actually reduce/remove my stinging by trying different locations and lengths of needles.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login