I'm Hooked On Pens
-
I have a V2 pen I bought from Randy.
I saw a few comments about a few more drops coming out of the needle after removing the injection pen. I saw some comments saying leave the pen in a few seconds after injecting. That would be fine if the pain after pressing the injection button wouldn’t become significantly more painful after it bottoms out. I’m using the glucicare 32 gauge 4mm needles.
I don’t know if I’m doing something wrong or if this is normal.@dcasa10452 When using any pen for injection it's always good practice to leave it in five to sevens seconds to make sure it has all been dispensed. Just out of curiosity, what are you researching that would cause that much pain? You also might try a longer needle, maybe a 5mm or 6mm. Going a little deeper seems to help.
-
@dcasa10452 When using any pen for injection it's always good practice to leave it in five to sevens seconds to make sure it has all been dispensed. Just out of curiosity, what are you researching that would cause that much pain? You also might try a longer needle, maybe a 5mm or 6mm. Going a little deeper seems to help.
@mrjoshua44 researching Pinealon.
I’ve taken Mots-C and Nad+ and have experienced that little burning sensation but this is more of a being stabbed pain. I noticed it the very first time using the pen and thought maybe I pushed the button too fast and have gone very slow afterwards and every time it’s that same pain. I usually jab myself in the abdomen area and even switched up a couple times and went into the top fatty part of my thigh. Same pain. And I font feel it until the last 2-3 units. -
It’s pretty confusing being when I normally inject with a normal insulin syringe at a larger gauge and a longer length injections are virtually painless.
-
Any info on where researchers are buying pins for pens, my coyote lives in CA and often sites are wanting a prescription to order. Made the move over the holiday for pens 1 gansulin and 3 xulin's and my coyote is eager to try them out
-
Any info on where researchers are buying pins for pens, my coyote lives in CA and often sites are wanting a prescription to order. Made the move over the holiday for pens 1 gansulin and 3 xulin's and my coyote is eager to try them out
-
If anyone has an odd love affair, like myself, with the plastic V2 Randy use to carry in his shop… I found some on Amazon
amazon.com/dp/B0H6D5CCW5
-
@dcasa10452 When using any pen for injection it's always good practice to leave it in five to sevens seconds to make sure it has all been dispensed. Just out of curiosity, what are you researching that would cause that much pain? You also might try a longer needle, maybe a 5mm or 6mm. Going a little deeper seems to help.
@dcasa10452 When using any pen for injection it's always good practice to leave it in five to sevens seconds to make sure it has all been dispensed. Just out of curiosity, what are you researching that would cause that much pain? You also might try a longer needle, maybe a 5mm or 6mm. Going a little deeper seems to help.
I use a 31G 8mm
-
There are specific design differences with them, and experientially, they are not the same. I find that I like the V1’s and V2’s Randy sells best, though a smooth Gansulin is top notch. V3’s are okay, and I haven’t tried the V4’s, which IIRC are noticably thinner than the others. I don’t really care about spring loaded needle hiders or any of that so it’s wasted on me. I just want a smooth running pen with a consistent mechanism.
My next run will be to test my Xiulins with bigger needles to see if that resolves their sticking problem.
-
There are specific design differences with them, and experientially, they are not the same. I find that I like the V1’s and V2’s Randy sells best, though a smooth Gansulin is top notch. V3’s are okay, and I haven’t tried the V4’s, which IIRC are noticably thinner than the others. I don’t really care about spring loaded needle hiders or any of that so it’s wasted on me. I just want a smooth running pen with a consistent mechanism.
My next run will be to test my Xiulins with bigger needles to see if that resolves their sticking problem.
@ResearchCat the V4 and V3 Ultra are the smoothest. I have all of them. I like the V4 and V3 ultra better than the zulin. The zulin takes a lot of thumb pressure and isn’t as smooth. I love my gansolin lately gonna order another on the sale
-
Yeah, my gripe with the zulin is that it takes a huge amount of pressure to get it to work. I have 3 and they are all like that. Love my gansulins, but if you use cheap carts and they get stuck, it is annoying.
-
Any info on where researchers are buying pins for pens, my coyote lives in CA and often sites are wanting a prescription to order. Made the move over the holiday for pens 1 gansulin and 3 xulin's and my coyote is eager to try them out
@sgirmant I've been getting mine from Amazon.
-
@Splinter I've never had a problem before. Then again, I'll leave mine in about 6-8 seconds after it stops just to make sure every drop has dispensed.
@mrjoshua44 - 100% - when the clicking stops, the piston is still under pressure and dispensing the dose.
-
@dcasa10452 When using any pen for injection it's always good practice to leave it in five to sevens seconds to make sure it has all been dispensed. Just out of curiosity, what are you researching that would cause that much pain? You also might try a longer needle, maybe a 5mm or 6mm. Going a little deeper seems to help.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login